For my project, I am going to revamp the LED Gloves I had previously shown. For this project, I plan on using EL wire instead of the LEDs I had been using. It will eliminate the entire process of using the conductive thread and making the gloves have problems not working. I will end up sewing the EL wire to the gloves, like I had with the LEDs, but this will be an easier and less messy process. I am going to end up connecting the EL wire to a EL Inverter which will connect to the Arduino, which will have an EL Shield on it, which will allow for two or four of the EL Inverters to connect to the shield. I might be using two EL Shields, one for each set of gloves.