Final Project
My Project is a light up sticky note installation.
For this project you will need :
-A roll of tape
-Sticky notes, plenty (500+)
You can make any design, but I chose to make a mermaid.
I started out with creating a sketch of what I was going to put on the wall. After I had my sketch done the next step was to begin adding the sticky notes to the wall. The way I did it was I made like an outline of the mermaid just to get the general shape down. Once you have an outline, if there are any sticky notes coming off from the wall, add tape to the notes to make sure they are flat. It should look something like this :
Once you have the outline done all you have to do is decide on a pattern or color scheme to fill in the design and paste sticky note over sticky note like scales.
Just continue filling in the blank space and laying the notes over each other until your shape is all filled in. I added these green squiggles to look like seaweed, to do these just lay some stickies in a straight line and then towards the end, like the last 3, fold 2 corners inwards so they touch in the center behind the note. add tape to any loose stickies and then you should be done.
Ricky Rodriguez