#include <Adafruit_CircuitPlayground.h> #include <FastLED.h> #include <Wire.h> #include <SPI.h> #include <math.h> // — External strip — #define STRIP_PIN A2 #define STRIP_LEDS 30 #define LED_TYPE WS2812B #define COLOR_ORDER GRB CRGB stripLeds[STRIP_LEDS]; int sensorPin = A1; // there is no A10… int sensorValue = 0; int brightVal = 255; // — Color list: {red, green, blue} — const…
Category: Uncategorized
Mood/Emotion Detector Necklace & Mood/Emotion Simon Says Game Wristband – Final Project (Neisha Allen)
Mood/Emotion Detector Necklace This project is interactive and explores how physical gestures and breath can be translated into emotional states using light. Different movements and breathing patterns trigger different emotional responses, allowing the user to perform and observe moods through visual feedback. Using the Circuit Playground’s built-in accelerometer, microphone, buttons, and NeoPixel LEDs, the device…
Interactive Lantern – Brianna Gabriel
This interactive project is a lantern that changes color when it is shaken. The inspiration came from a video game character that I really like, and my interest in making a functioning item that has a purpose. The change of color is created by the circuit registering being shaken, which records the motion. Through the…
Evelyn Roque Interactive Project: Stage with Bluetooth LEDS.
This project is inspired by the game Bang Dream Girls Band Party, where a band is on stage while playing the game lights interact with the music. I created a stage that features original characters that has Bluetooth capabilities that sync with any device. It allows the lights to flash whenever music plays or reacts…
Mood/Emotion Detector – Interactive Project (Neisha Allen)
This project is interactive and explores how physical gestures and breath can be translated into emotional states using light and sound. Different movements trigger different emotional responses, allowing the user to perform and observe different moods. Using the Circuit Playground’s built-in accelerometer, speaker, microphone, buttons, and NeoPixel LEDs, the device will be able to respond…
Moth wing switch – Brianna Gabriel
I was inspired by a moth plushie I own that has magnets in its wings. The magnets allow it toopen and close its wings. For my recreation I used conductive thread tied to led’s and activated with battery’s. By pressing the wings together, the led’s on the LEDs on its antennas. Materials.
Daisy :D – Salmon Lantern Creative Switch Project
·｡𓇼 ⋆.˚ °‧𓆝 𓆟 𓆞 ·｡𓇼 ⋆.˚ °‧ 𓆝 𓆟 𓆞 ·｡𓇼 ⋆.˚ This project was honestly really time consuming, especially the exoskeleton part of this project. I was looking for a cool light up project that can bring in a little bit of whimsy into my room (and hopefully yours as well!) with a…
Jamyla Eatman – Creative Switch
How to’s I used the tutorial https://www.youtube.com/watch?v=VGuT-Spamt4&list=PLbU-EWvkYMLNvmKz_DOnXw_FrZR9hZ5aR&index=3 I only used the first part in this project Materials cardboard Paper Glue battery led light When you are following the video, at step six, you will add your switch. All you have to do is make sure it’s dry, drill a hole so the LED light fits,…
Evelyn Roque Creative Switch Instructables
Materials used: Aluminum foil Cotton thread Tape Paper Led lights 4 batteries Conductive thread First create the desired character on the paper. Concept: My character Luna hands lights up when you touch her hands, and it will glow. Once you touch both hands the hair accessory will also light up. Cut three holes for the…
Galia Quezada – Encoding Digital & Analogue Taxonavigation
My material philosophy more often has to do with conceptual meanings over the physical properties of the material. While I do prefer to use materials that are light and less difficult to work with, I don’t often consider factors such as their longevity or performance. If anything, most of the time the materials I use…
Galia Quezada – Creative Switch
Apartment Lights and Stray Cat For this project I wanted to create something that would trigger the LEDs to turn on using conductive tape as well as pressure on the battery to activate the switch. In order to create this project I decided to use materials which were easily accessible such as cardboard for the…
Evelyn Roque-Creative Switch Revision
I will feature a character that will have LEDs in her hands and in her hair. It will be a total of 3 LEDs with the colors red, blue, and white. I will use aluminum foil to create a circuit, the goal is to have the LEDS light up when touching the hands, but it…